The top five equipment maintenance tips for concrete mixing plants are all here, collect them now! Concrete mixing plants are composed of a mixing host, material weighing and proportioning equipment, material conveying equipment, material storage equipment, a control system and other ancillary facilities. The smooth operation of a mixing plant is inseparable from its daily maintenance. Mixing plant equipment requires daily and careful maintenance to minimize the occurrence of machine failures and increase the service life of the equipment. This article combines some guidance given by Jinhuiyuan Mechanical Engineers to introduce the top five equipment maintenance tips for concrete mixing plants, hoping to be of some benefit to all mixing plant users in their daily production in the future.

Maintenance of the mixing main machine
1. Check whether the sealing chamber, distributor inlet and outlet, and sealing pipeline are unobstructed every shift, and whether there is enough lubricating oil (grease) at each lubrication point and reduction box;
2. Observe whether the grease in the oil storage cylinder of the electric lubrication pump is used up every shift, and replenish it in time when it is almost used up;
3. The accumulated materials inside and outside the mixing drum, the discharge door, etc. must be completely cleaned and rinsed with water at the handover of each shift. The bonding materials that are not rinsed clean must be chiseled off regularly;
4. Check the mixing blades regularly every week, adjust and tighten them once to prevent accidents caused by blade shedding.

Maintenance of material weighing and proportioning equipment
1. Each shift must check and adjust the soft interfaces of the metering bucket to ensure that there is no looseness in the length and to ensure metering accuracy;
2. After winter shutdown, the water supply system and the water stored in the admixture supply must be drained to prevent water from freezing and cracking the equipment;
3. If the admixture pump is seasonally shut down, it must be flushed regularly to prevent the additives in the pipeline and pump from precipitating and sticking, causing blockage. …

“Can we still open a concrete mixing station when environmental protection inspections are so strict?” “Will it be difficult to invest in an environmentally friendly concrete mixing station? Is the investment cost high?”… The above questions are the most frequently asked questions on the Jinhuiyuan Machinery website recently, and these questions are also one of the reasons why investors are hesitant about mixing stations. Commercial concrete is indeed an investment project with large market space and considerable profits, but strict environmental protection inspections have caused many mixing station companies to complain. So, with perfect technical support, is it really difficult to open an environmentally friendly commercial concrete mixing station? How about the cost? This article will explain it in detail for you.

Is it difficult to open an environmentally friendly concrete mixing station? You decide!
Society is progressing, technology is developing, and although environmental protection has always been a major problem restricting industrial production, with more and more environmentally friendly equipment and auxiliary devices entering the market, opening an environmentally friendly commercial concrete mixing station is no longer a problem, and achieving efficient and environmentally friendly production has become commonplace. Speaking of this, we have to let the site prove it.
1. Zhongxiu, Jinzhong, Shanxi

As can be seen from the picture, the commercial concrete mixing station is not only equipped with a pulse dust removal device, but also equipped with dust shields in the storage bin, conveyor and other parts that are prone to dust. Therefore, when the entire mixing station is in operation, there is very little dust spillage, and the working environment is relatively clean and tidy.

Mianyang, Sichuan

The mixing station uses bucket lifting loading. Although the commercial concrete mixing station is equipped with…

With the continuous development of society, the progress of infrastructure construction is constantly advancing, the popularity of concrete mixing stations is increasing year by year, and the mixing station equipment production industry has developed extremely rapidly in recent years. Since the 18th National Congress of the Communist Party of China proposed the construction of ecological civilization, the development of many industries has been restricted. After several generations of innovation and development of concrete mixing stations, “green mixing stations” will replace traditional forms and become the development direction of the industry. The key to building an environmentally friendly mixing station is to reduce and reasonably control the various industrial pollution generated during the production process. The key to building an energy-saving mixing station is to reduce the required human, material, electricity and other resources from the preparation to the daily operation process, and comprehensively improve the input-output ratio.This article will combine the opinions of Jinhuiyuan Mechanical Engineers to start from the problems existing in traditional mixing plants in terms of environmental protection and energy saving, and propose corresponding improvement measures and maintenance precautions for different links.

Environmental protection measures for mixing stations
Traditional mixing stations mainly produce “waste residue, waste liquid, dust, noise” and other forms of pollution during use. Different pollution in different parts requires different purification treatment methods.
1. “Dust” control measures for mixing stations: isolation and recycling. Environmentally friendly mixing stations should adopt “double insurance” measures for dust treatment. The first is isolation, that is, all dust pollution sources in the mixing station system are sealed and sealed to isolate the pollutants from the outside world first; then take specific measures according to the different causes of dust generation…

With the rapid development of the domestic economy and the continuous advancement of the modernization of urban transportation, the consumption of stabilized soil has increased year by year. It is particularly important to ensure that the stabilized soil mixing plant can produce long-term stable and efficient output. Today, the editor invited Jinhuiyuan Mechanical Engineer to explain in detail the correct operating specifications of the stabilized soil mixing plant, hoping to play a positive role in future actual production.

1. Preparation before starting
1. Check whether the connections of all parts of the stabilized soil mixing station mixer are firm and reliable, whether the lubricating oil of each part is filled to the specified value, check whether there is leakage at both ends of the main shaft, check whether the storage bin door is opened and closed, whether the gap between the mixing blade and the lining is within the specified range, whether the transport belt is damaged, and whether the mixer can rotate normally;
2. Check whether the electrical control system is safe and reliable, whether there is leakage, short circuit, and whether the insurance device is normal;
3. Check whether the air compressor is running normally without abnormal sound and leakage, and ensure that the pressure is kept within the specified range;
4. Ensure that each weighing device measures accurately and the error is within the standard range;
5. The equipment can be started only after confirming that there are no safety hazards in the silo and belt transportation.

2. Precautions during work
1. After starting the mixing system of the stabilized soil mixing station, it should be run empty first, carefully check the operation of the machine, and check whether the direction of the mixing shaft is correct. After confirming that the mixing system is correct, production can be carried out;
2. Closely monitor the belt conveyor and feeding system to prevent excessive or large stones and other foreign objects from entering the silo;
3. Closely…

On October 12, 2019, the Jinhuiyuan Machinery Production Workshop welcomed the visit of an international friend, a Thai customer. The main purpose of this visit was to conduct a field investigation of the HZS25 concrete mixing station project equipment that had been negotiated on the Internet before. The visiting customer was warmly received by the leaders of the Jinhuiyuan Machinery Department.
After the customer arrived at the factory, accompanied by the department leader, he carefully checked the large and small parts including the forced mixer, concrete batching machine, reducer, mixer wear parts, mixing blades and motors. Every time the Thai customer checked a part, he communicated with our accompanying engineers and translators at the technical level, which made people feel the rigorous attitude of foreign customers.
After a detailed inspection, the Thai customer highly affirmed the manufacturing capabilities of Jinhuiyuan Machinery and took a happy photo with our accompanying personnel. After a brief meeting with our accompanying personnel in the conference room, the Thai customer left. Before leaving, the Thai customer said: “Every time I come to China, I will have new gains. I am very satisfied with your equipment and admire your professional attitude. I hope we can continue to cooperate happily in the future.”

Jinhuiyuan Machinery has always been an enterprise engaged in the research and development and manufacturing of mixing station equipment in China. Over the years, the professional technical team has never stopped improving excellent mixing station equipment. It is this focus and professionalism that makes our company’s mixing station equipment highly praised in the market. “Excellent quality”…

Recently, a set of 120 cubic meters per hour concrete mixing station hzs120 equipment independently developed and manufactured by Jinhuiyuan was officially packed and shipped in the factory. This set of equipment will be exported to Thailand and used for the production of local commercial concrete, contributing to local economic development.

This set of commercial concrete mixing station equipment is designed according to the customer’s process requirements. This set of mixing station equipment includes JS2000 forced mixer, PLD3200 pneumatic batching machine, cement silo, control room and supporting base bracket, hopper, spiral and other accessories. The forced mixer delivered this time has a special design in the internal structure, which not only improves the mixing efficiency, but also effectively avoids the phenomenon of incomplete discharge and material sticking to the inner wall.

This cooperation with Thai users has further affirmed the strength of Jinhuiyuan. After years of hard work, Zhengzhou Jinhuiyuan Machinery Manufacturing Co., Ltd. has developed into a typical enterprise that mainly produces concrete mixing plants, stabilized soil mixing plants, and drying equipment, integrating scientific research, manufacturing, and sales. The equipment shipped this time meets the requirements of the country’s new era of national science and technology and green environmental protection. Since its launch, it has received unanimous praise from professionals. It has also played a good demonstration and leading role in Jinhuiyuan’s future development of foreign markets, providing unlimited space for future development.

As a manufacturer with a long history, Jinhuiyuan not only provides high-quality equipment to Thai users, but also provides users with professional engineers and experienced maintenance personnel who are responsible for guiding the installation and commissioning of on-site equipment. At the same time, Jinhuiyuan also provides Thai users with professional…

With the continuous advancement of urban modernization, the demand for concrete is increasing day by day. Concrete production equipment – concrete mixing stations are becoming more and more popular in major projects. More and more people are engaged in this industry. This article combines the guidance given by Jinhuiyuan technical engineers to summarize several common faults and treatment methods of concrete mixing station equipment, so that practitioners can solve problems in time when encountering emergencies, and minimize the bad impression caused to the company by equipment problems.

1. Mixing station equipment
Common fault phenomena:
1. The discharge door does not operate smoothly.
2. The mixer trips.
3. The mixer makes abnormal noises, which causes the mixer host to not operate normally, directly affecting the working efficiency of the mixer.
Treatment method:
1. Replace the proximity switch of the same model. Hydraulic unit: There is a lack of hydraulic oil in the hydraulic station, replenish the hydraulic oil, and adjust the pressure; check whether there is any accumulation of material around the discharge door, and clean it up in time.
2. Adjust the tension of the transmission belt in time; adjust the gap between the mixing knives in time, and replace the mixing knives if necessary; there should be an emergency treatment plan.
3. Check whether the protective cover is loose and whether there are any problems with the bearings in time; check whether there is any lubricating oil follow-up; whether there is any friction between the protective ring A/B.

2. Aggregate conveying equipment
Common fault phenomena:
During the belt conveyor’s no-load or loaded operation, the belt may run sideways or slip when it is loaded, causing leakage and abnormal wear of the equipment, reducing the efficiency of the commercial concrete mixing station…

Since the beginning of winter, the workers of Jinhuiyuan Machinery have not been affected by the weather and are still busy with production, sales, delivery and other work. This has long become a tiring and happy thing for Jinhuiyuan employees. Last month, after many comparisons, a Cambodian customer came to our factory for a field investigation and finally decided to order a set of HZS25 concrete mixing plant equipment from our factory. The equipment was shipped to Cambodia today.
This set of HZS25 concrete mixing station equipment is tailor-made according to the customer’s production site and process requirements. This set of equipment includes JS500 forced concrete mixer with a discharge height of 3.8m, PLD1200 three-bin concrete batching machine, cement weighing, water weighing, admixture weighing, screw conveyor, air control system, centralized control system, etc. Among them, the JS500 forced concrete mixer has a special design on the internal structure, which not only improves the mixing efficiency, but also effectively avoids the sticking phenomenon of concrete in the mixer, which can greatly improve the quality of commercial concrete.
HZS25 concrete mixing station equipment loading site:

Infrastructure construction has always been inseparable from commercial concrete. The demand for commercial concrete has been increasing with the acceleration of social development. Cambodian customers are purchasing Jinhuiyuan’s equipment to produce commercial concrete for the construction of local water conservancy projects.
HZS25 concrete mixing station equipment delivery site:

This cooperation with Cambodian customers further affirms the strength of Jinhuiyuan Machinery. Zhengzhou Jinhuiyuan Machinery…

The beginning of 2020 seems to remind each of us to learn to cherish the people around us. The sudden outbreak in Wuhan caught us all off guard. When one side is in trouble, all sides support it. China has proved to the world what true solidarity is. Thanks to the medical staff and workers on the front line of the fight against the epidemic.Years ago, Mr. Li ordered a set of HZS60 concrete mixing plant to export to Cambodia. Due to the outbreak of the epidemic, the delivery was repeatedly delayed. Now that the epidemic has been brought under control and improved, and China has gradually resumed its daily life, the workers have been working non-stop. Mr. Li’s 60 mixing plant has been completed and will be shipped to Myanmar soon. Next, let’s explore the delivery site with the editor.
HZS60 concrete mixing station is a small product in the mechanical mixing station series. It is an automatic concrete mixing equipment consisting of storage, feeding, batching, mixing, electrical control and steel structure components. It can mix plastic, dry hard concrete, lightweight aggregate concrete and various mortars. It is a high-efficiency concrete mixing station.
Finally, I would like to thank Mr. Li for his trust in Jinhuiyuan. Secondly, thank you to those who are on the front line of the fight against the epidemic. Thank you. The most beautiful retrograde in the fight against the epidemic. Winter is coming to an end, spring is expected, the mountains and rivers are safe, and the world is safe.

HZS50 concrete mixing plant was sent to Cambodia to help local construction and development. HZS50 concrete mixing plant includes JS1000 main machine, PLD1200 two-bin batching machine, screw conveyor, cement silo, cement weighing, water weighing, additive weighing, and centralized control.
 

 With the strategic support of the “One Belt, One Road” initiative, commercial trade has developed rapidly. In recent years, more and more foreign customers have reached cooperation with us, allowing our equipment to go abroad and to the world!

The trust and recognition of our customers is our greatest motivation for progress, and we will certainly work harder to create higher quality! Welcome!

The top five equipment maintenance tips for concrete mixing plants are all here, collect them now! Concrete mixing plants are composed of a mixing host, material weighing and proportioning equipment, material conveying equipment, material storage equipment, a control system and other ancillary facilities. The smooth operation of a mixing plant is inseparable from its daily maintenance. Mixing plant equipment requires daily and careful maintenance to minimize the occurrence of machine failures and increase the service life of the equipment. This article combines some guidance given by Jinhuiyuan Mechanical Engineers to introduce the top five equipment maintenance tips for concrete mixing plants, hoping to be of some benefit to all mixing plant users in their daily production in the future.

Maintenance of the mixing main machine
1. Check whether the sealing chamber, distributor inlet and outlet, and sealing pipeline are unobstructed every shift, and whether there is enough lubricating oil (grease) at each lubrication point and reduction box;
2. Observe whether the grease in the oil storage cylinder of the electric lubrication pump is used up every shift, and replenish it in time when it is almost used up;
3. The accumulated materials inside and outside the mixing drum, the discharge door, etc. must be completely cleaned and rinsed with water at the handover of each shift. The bonding materials that are not rinsed clean must be chiseled off regularly;
4. Check the mixing blades regularly every week, adjust and tighten them once to prevent accidents caused by blade shedding.

Maintenance of material weighing and proportioning equipment
1. Each shift must check and adjust the soft interfaces of the metering bucket to ensure that there is no looseness in the length and to ensure metering accuracy;
2. After winter shutdown, the water supply system and the water stored in the admixture supply must be drained to prevent water from freezing and cracking the equipment;
3. If the admixture pump is seasonally shut down, it must be flushed regularly to prevent the additives in the pipeline and pump from precipitating and sticking, causing blockage. …

“Can we still open a concrete mixing station when environmental protection inspections are so strict?” “Will it be difficult to invest in an environmentally friendly concrete mixing station? Is the investment cost high?”… The above questions are the most frequently asked questions on the Jinhuiyuan Machinery website recently, and these questions are also one of the reasons why investors are hesitant about mixing stations. Commercial concrete is indeed an investment project with large market space and considerable profits, but strict environmental protection inspections have caused many mixing station companies to complain. So, with perfect technical support, is it really difficult to open an environmentally friendly commercial concrete mixing station? How about the cost? This article will explain it in detail for you.

Is it difficult to open an environmentally friendly concrete mixing station? You decide!
Society is progressing, technology is developing, and although environmental protection has always been a major problem restricting industrial production, with more and more environmentally friendly equipment and auxiliary devices entering the market, opening an environmentally friendly commercial concrete mixing station is no longer a problem, and achieving efficient and environmentally friendly production has become commonplace. Speaking of this, we have to let the site prove it.
1. Zhongxiu, Jinzhong, Shanxi

As can be seen from the picture, the commercial concrete mixing station is not only equipped with a pulse dust removal device, but also equipped with dust shields in the storage bin, conveyor and other parts that are prone to dust. Therefore, when the entire mixing station is in operation, there is very little dust spillage, and the working environment is relatively clean and tidy.

Mianyang, Sichuan

The mixing station uses bucket lifting loading. Although the commercial concrete mixing station is equipped with…

With the continuous development of society, the progress of infrastructure construction is constantly advancing, the popularity of concrete mixing stations is increasing year by year, and the mixing station equipment production industry has developed extremely rapidly in recent years. Since the 18th National Congress of the Communist Party of China proposed the construction of ecological civilization, the development of many industries has been restricted. After several generations of innovation and development of concrete mixing stations, “green mixing stations” will replace traditional forms and become the development direction of the industry. The key to building an environmentally friendly mixing station is to reduce and reasonably control the various industrial pollution generated during the production process. The key to building an energy-saving mixing station is to reduce the required human, material, electricity and other resources from the preparation to the daily operation process, and comprehensively improve the input-output ratio.This article will combine the opinions of Jinhuiyuan Mechanical Engineers to start from the problems existing in traditional mixing plants in terms of environmental protection and energy saving, and propose corresponding improvement measures and maintenance precautions for different links.

Environmental protection measures for mixing stations
Traditional mixing stations mainly produce “waste residue, waste liquid, dust, noise” and other forms of pollution during use. Different pollution in different parts requires different purification treatment methods.
1. “Dust” control measures for mixing stations: isolation and recycling. Environmentally friendly mixing stations should adopt “double insurance” measures for dust treatment. The first is isolation, that is, all dust pollution sources in the mixing station system are sealed and sealed to isolate the pollutants from the outside world first; then take specific measures according to the different causes of dust generation…

With the rapid development of the domestic economy and the continuous advancement of the modernization of urban transportation, the consumption of stabilized soil has increased year by year. It is particularly important to ensure that the stabilized soil mixing plant can produce long-term stable and efficient output. Today, the editor invited Jinhuiyuan Mechanical Engineer to explain in detail the correct operating specifications of the stabilized soil mixing plant, hoping to play a positive role in future actual production.

1. Preparation before starting
1. Check whether the connections of all parts of the stabilized soil mixing station mixer are firm and reliable, whether the lubricating oil of each part is filled to the specified value, check whether there is leakage at both ends of the main shaft, check whether the storage bin door is opened and closed, whether the gap between the mixing blade and the lining is within the specified range, whether the transport belt is damaged, and whether the mixer can rotate normally;
2. Check whether the electrical control system is safe and reliable, whether there is leakage, short circuit, and whether the insurance device is normal;
3. Check whether the air compressor is running normally without abnormal sound and leakage, and ensure that the pressure is kept within the specified range;
4. Ensure that each weighing device measures accurately and the error is within the standard range;
5. The equipment can be started only after confirming that there are no safety hazards in the silo and belt transportation.

2. Precautions during work
1. After starting the mixing system of the stabilized soil mixing station, it should be run empty first, carefully check the operation of the machine, and check whether the direction of the mixing shaft is correct. After confirming that the mixing system is correct, production can be carried out;
2. Closely monitor the belt conveyor and feeding system to prevent excessive or large stones and other foreign objects from entering the silo;
3. Closely…

On October 12, 2019, the Jinhuiyuan Machinery Production Workshop welcomed the visit of an international friend, a Thai customer. The main purpose of this visit was to conduct a field investigation of the HZS25 concrete mixing station project equipment that had been negotiated on the Internet before. The visiting customer was warmly received by the leaders of the Jinhuiyuan Machinery Department.
After the customer arrived at the factory, accompanied by the department leader, he carefully checked the large and small parts including the forced mixer, concrete batching machine, reducer, mixer wear parts, mixing blades and motors. Every time the Thai customer checked a part, he communicated with our accompanying engineers and translators at the technical level, which made people feel the rigorous attitude of foreign customers.
After a detailed inspection, the Thai customer highly affirmed the manufacturing capabilities of Jinhuiyuan Machinery and took a happy photo with our accompanying personnel. After a brief meeting with our accompanying personnel in the conference room, the Thai customer left. Before leaving, the Thai customer said: “Every time I come to China, I will have new gains. I am very satisfied with your equipment and admire your professional attitude. I hope we can continue to cooperate happily in the future.”

Jinhuiyuan Machinery has always been an enterprise engaged in the research and development and manufacturing of mixing station equipment in China. Over the years, the professional technical team has never stopped improving excellent mixing station equipment. It is this focus and professionalism that makes our company’s mixing station equipment highly praised in the market. “Excellent quality”…

Recently, a set of 120 cubic meters per hour concrete mixing station hzs120 equipment independently developed and manufactured by Jinhuiyuan was officially packed and shipped in the factory. This set of equipment will be exported to Thailand and used for the production of local commercial concrete, contributing to local economic development.

This set of commercial concrete mixing station equipment is designed according to the customer’s process requirements. This set of mixing station equipment includes JS2000 forced mixer, PLD3200 pneumatic batching machine, cement silo, control room and supporting base bracket, hopper, spiral and other accessories. The forced mixer delivered this time has a special design in the internal structure, which not only improves the mixing efficiency, but also effectively avoids the phenomenon of incomplete discharge and material sticking to the inner wall.

This cooperation with Thai users has further affirmed the strength of Jinhuiyuan. After years of hard work, Zhengzhou Jinhuiyuan Machinery Manufacturing Co., Ltd. has developed into a typical enterprise that mainly produces concrete mixing plants, stabilized soil mixing plants, and drying equipment, integrating scientific research, manufacturing, and sales. The equipment shipped this time meets the requirements of the country’s new era of national science and technology and green environmental protection. Since its launch, it has received unanimous praise from professionals. It has also played a good demonstration and leading role in Jinhuiyuan’s future development of foreign markets, providing unlimited space for future development.

As a manufacturer with a long history, Jinhuiyuan not only provides high-quality equipment to Thai users, but also provides users with professional engineers and experienced maintenance personnel who are responsible for guiding the installation and commissioning of on-site equipment. At the same time, Jinhuiyuan also provides Thai users with professional…

With the continuous advancement of urban modernization, the demand for concrete is increasing day by day. Concrete production equipment – concrete mixing stations are becoming more and more popular in major projects. More and more people are engaged in this industry. This article combines the guidance given by Jinhuiyuan technical engineers to summarize several common faults and treatment methods of concrete mixing station equipment, so that practitioners can solve problems in time when encountering emergencies, and minimize the bad impression caused to the company by equipment problems.

1. Mixing station equipment
Common fault phenomena:
1. The discharge door does not operate smoothly.
2. The mixer trips.
3. The mixer makes abnormal noises, which causes the mixer host to not operate normally, directly affecting the working efficiency of the mixer.
Treatment method:
1. Replace the proximity switch of the same model. Hydraulic unit: There is a lack of hydraulic oil in the hydraulic station, replenish the hydraulic oil, and adjust the pressure; check whether there is any accumulation of material around the discharge door, and clean it up in time.
2. Adjust the tension of the transmission belt in time; adjust the gap between the mixing knives in time, and replace the mixing knives if necessary; there should be an emergency treatment plan.
3. Check whether the protective cover is loose and whether there are any problems with the bearings in time; check whether there is any lubricating oil follow-up; whether there is any friction between the protective ring A/B.

2. Aggregate conveying equipment
Common fault phenomena:
During the belt conveyor’s no-load or loaded operation, the belt may run sideways or slip when it is loaded, causing leakage and abnormal wear of the equipment, reducing the efficiency of the commercial concrete mixing station…

Since the beginning of winter, the workers of Jinhuiyuan Machinery have not been affected by the weather and are still busy with production, sales, delivery and other work. This has long become a tiring and happy thing for Jinhuiyuan employees. Last month, after many comparisons, a Cambodian customer came to our factory for a field investigation and finally decided to order a set of HZS25 concrete mixing plant equipment from our factory. The equipment was shipped to Cambodia today.
This set of HZS25 concrete mixing station equipment is tailor-made according to the customer’s production site and process requirements. This set of equipment includes JS500 forced concrete mixer with a discharge height of 3.8m, PLD1200 three-bin concrete batching machine, cement weighing, water weighing, admixture weighing, screw conveyor, air control system, centralized control system, etc. Among them, the JS500 forced concrete mixer has a special design on the internal structure, which not only improves the mixing efficiency, but also effectively avoids the sticking phenomenon of concrete in the mixer, which can greatly improve the quality of commercial concrete.
HZS25 concrete mixing station equipment loading site:

Infrastructure construction has always been inseparable from commercial concrete. The demand for commercial concrete has been increasing with the acceleration of social development. Cambodian customers are purchasing Jinhuiyuan’s equipment to produce commercial concrete for the construction of local water conservancy projects.
HZS25 concrete mixing station equipment delivery site:

This cooperation with Cambodian customers further affirms the strength of Jinhuiyuan Machinery. Zhengzhou Jinhuiyuan Machinery…

The beginning of 2020 seems to remind each of us to learn to cherish the people around us. The sudden outbreak in Wuhan caught us all off guard. When one side is in trouble, all sides support it. China has proved to the world what true solidarity is. Thanks to the medical staff and workers on the front line of the fight against the epidemic.Years ago, Mr. Li ordered a set of HZS60 concrete mixing plant to export to Cambodia. Due to the outbreak of the epidemic, the delivery was repeatedly delayed. Now that the epidemic has been brought under control and improved, and China has gradually resumed its daily life, the workers have been working non-stop. Mr. Li’s 60 mixing plant has been completed and will be shipped to Myanmar soon. Next, let’s explore the delivery site with the editor.
HZS60 concrete mixing station is a small product in the mechanical mixing station series. It is an automatic concrete mixing equipment consisting of storage, feeding, batching, mixing, electrical control and steel structure components. It can mix plastic, dry hard concrete, lightweight aggregate concrete and various mortars. It is a high-efficiency concrete mixing station.
Finally, I would like to thank Mr. Li for his trust in Jinhuiyuan. Secondly, thank you to those who are on the front line of the fight against the epidemic. Thank you. The most beautiful retrograde in the fight against the epidemic. Winter is coming to an end, spring is expected, the mountains and rivers are safe, and the world is safe.